This part counts 5% of afternoon points based on NCEES FE Supplied-Reference Handbook, 8th edition, 2nd revision.
1. Hazardous properties of materials.
This section includes noise, PPE, and ergonomics.
2. Industrial hygiene.
This section includes time constants, 2nd order, and underdamped.
3. Process hazard analysis.
This section includes using fault-tree analysis and event tree.
4. Overpressure and underpressure protection.
This section includes relief, redundant control, and intrinsically safe.
5. Storage and handling.
This section includes inerting and spill containment.
6. Waste minimization.
7. Waste treatment.
This section includes air, water and solids.
Popular Posts
-
In surveying, trigonometry is fundamental math. It is used to determine angle, distance, height, location. 1. The three basic functions ar... -
1. Internal and external forces. 2. Concentrated forces and distributed forces. 3. Moments and components of moment. 4. Moment about a...
-
FE exam is a eight-hour exam. Four hours in the morning is for everybody. There are 120 questions. Four hours in the afternoon is for your i... -
This part counts 10% of afternoon points based on NCEES FE Supplied-Reference Handbook, 8th edition, 2nd revision. 1. Mathematical fundame...
-
This part takes 7% of morning points based on NCEES FE Supplied-Reference Handbook, 8th edition, 2nd revision. FE Morning Math...
-
Math is 15% of morning points. It is base of the engineering. You have to be good at math in order to be a good engineer. ...
-
This part takes 7% of morning points based on NCEES FE Supplied-Reference Handbook, 8th edition, 2nd revision. ...
No comments:
Post a Comment