This part counts 5% of afternoon points based on NCEES FE Supplied-Reference Handbook, 8th edition, 2nd revision.
1. Sensors and control values.
This section includes controls on temperature and pressure.
2. Dynamics.
This section includes time constants, 2nd order, and underdamped.
3. Feedback and feedforward control.
4. Proportional, integral, and derivative (PID) controller concepts.
5. Cascade control.
6. Control loop design.
This section includes matching measured and manipulated variables.
7. Tuning PID controllers and stability.
This section includes Method of Ziegler-Nichols and Routh Test.
8. Open-loop and closed-loop transfer functions.
Popular Posts
-
In surveying, trigonometry is fundamental math. It is used to determine angle, distance, height, location. 1. The three basic functions ar... -
1. Internal and external forces. 2. Concentrated forces and distributed forces. 3. Moments and components of moment. 4. Moment about a...
-
FE exam is a eight-hour exam. Four hours in the morning is for everybody. There are 120 questions. Four hours in the afternoon is for your i... -
This part counts 10% of afternoon points based on NCEES FE Supplied-Reference Handbook, 8th edition, 2nd revision. 1. Mathematical fundame...
-
This part takes 7% of morning points based on NCEES FE Supplied-Reference Handbook, 8th edition, 2nd revision. FE Morning Math...
-
Math is 15% of morning points. It is base of the engineering. You have to be good at math in order to be a good engineer. ...
-
This part takes 7% of morning points based on NCEES FE Supplied-Reference Handbook, 8th edition, 2nd revision. ...
No comments:
Post a Comment